Cary Audio has always supported playback of vinyl records, and today there is a revival of the LP as a serious format, both for audiophiles and for the general music public. The PH-302 MkII is a tube stereo phono preamplifier that offers inputs and selectable loading to match almost any moving-magnet or moving-coil phono cartridge. This will optimize the response, and provide high gain, to best match your cartridge.
The PH-302 MkII uses a fully regulated power supply and extensive shielding, to go along with carefully selected and matched parts and tubes to provide a very quiet background, exquisite sound quality, and wide dynamic range for getting the most out of every record. You’ll hear subtle shadings and exciting dynamic contrasts on all types of music. If you are serious about your vinyl music collection and your turntable, the PH-302 MkII should be part of your system.
Direct Coupled
Single-ended Class A
-78 dB below full output
MM – 47kΩ MC – Selectable 10Ω, 43Ω, 100Ω, 330Ω, 470Ω
660 Ohms
RIAA Curve + 0.5 dB, passive RIAA circuit design
1% Metal Film
6 ea – 47 µFd @ 350 VDC capacitors
100, 117 or 234 Volts @ 50/60 Hz, set by market
35 watts.
5 Minutes
22 lbs.
4″ H x 17″ W x 13″ D
by Cary Audio
Cary Audio has always supported playback of vinyl records, and today there is a revival of the LP as a serious format, both for audiophiles and for the general music public. The PH-302 MkII is a tube stereo phono preamplifier that offers inputs and selectable loading to match almost any moving-magnet or moving-coil phono cartridge. This will optimize the response, and provide high gain, to best match your cartridge.
The PH-302 MkII uses a fully regulated power supply and extensive shielding, to go along with carefully selected and matched parts and tubes to provide a very quiet background, exquisite sound quality, and wide dynamic range for getting the most out of every record. You’ll hear subtle shadings and exciting dynamic contrasts on all types of music. If you are serious about your vinyl music collection and your turntable, the PH-302 MkII should be part of your system.
Direct Coupled
Single-ended Class A
-78 dB below full output
MM – 47kΩ MC – Selectable 10Ω, 43Ω, 100Ω, 330Ω, 470Ω
660 Ohms
RIAA Curve + 0.5 dB, passive RIAA circuit design
1% Metal Film
6 ea – 47 µFd @ 350 VDC capacitors
100, 117 or 234 Volts @ 50/60 Hz, set by market
35 watts.
5 Minutes
22 lbs.
4″ H x 17″ W x 13″ D
